BMCLF - BLOCK BUSTER, DN4010

  • MSDS: BMCLF
  • Manufacturer: DRUMMOND AMERICAN CORP
  • Product Name: BLOCK BUSTER, DN4010
  • National Stock Number: 6840-00N024588
Product Identification

Product ID:BLOCK BUSTER, DN4010
MSDS Date:10/01/1990
FSC:6840
NIIN:00N024588
MSDS Number: BMCLF

Responsible Party
DRUMMOND AMERICAN CORP
600 CORPORATE WOOD PKWY
VERNON HILLS, IL 60061
US

Emergency Phone: 708-913-9313; 303-623-5716

Info Phone: 708-913-9313

Preparer: RICK LOWE

Cage: 64557

Contractor
DRUMMOND AMERICAN CORPORATION
VERNON HILLS, IL 60061 US

Telephone: 708-913-9313

Cage: 64557

Ingredients

BENZENE, P-DICHLORO-; (PARADICHLOROBENZENE)

CAS: 106-46-7

RTECS: CZ4550000

Fraction By Weight: 100%

OSHA PEL 75 PPM

ACGIH TLV: 10 PPM,A3 9394

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAPORS CAUSE IRRITATION TO SKIN,
THROAT & EYES. PROLONGED EXPOSURE TO HIGH CONCENTRATIONS MAY SHOW
DIZZINESS, WEAKNESS. LIVER INJURY MAY DEVELOP.
Explanation of Carcinogenicity:PARADICHLOROBENZENE: GROUP 2B (IARC),
GROUP 2 (NTP).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:DERMATITIS; BRONCHIAL CONDITION.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES, GET MD. INHAL: REMOVE PERSON TO FRESH AIR.
INGEST: INDUCE VOMITING. CALL MD.

Fire Fighting

Flash Point Method:TOC
Flash Point:150F,66C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.AVOID BRTHG FUMES & COMBUST PRODS.WATER MAY BE USED FOR COOLING
PURPOSES, BUT MAY NOT BE A SUITABLE EXTING.
Unusual Fire/Explosion Hazard:MATL SUBLIMES.IF TEMP ARE HIGH, SUFF MATL
MAY SUBLIME & BE IGNITED.VAPS HVR/AIR & WILL TRAVEL A CONSIDERABLE
DISTANCE TO IGNIT SOURCE. KEEP FROM IGNIT SOURCE.

Accidental Release

Spill Release Procedures:MATERIAL MAY BE SWEPT UP AND RETURNED TO
CONTAINER OR USED. KEEP OUT OF WATER SYSTEMS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
CNTNR CLSD WHEN NOT IN USE. READ LABEL DIRECTIONS & CAUTIONS BEFORE
USE. STORE IN COOL DRY AREA.
Other Precautions:AVOID DENSE ACCUMULATION OF VAPORS. AVOID SKIN AND
EYE CONTACT AND EXCESSIVE VAPOR INHALATION. STORE AWAY FROM
IGNITION SOURCES. CLEAN CONTAMINATED CLOTHING BEFORE REUSE.

Exposure Controls

Respiratory Protection:IF OVER TLV, USE A NIOSH/MSHA APPROVED SCBA.
Ventilation:LOCAL EXHAUST: FRESH AIR. MECHANICAL: NOT APPLICABLE.
Protective Gloves:PLASTIC OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH STATION AND SHOWER SHOULD BE
AVAILABLE FOR EMERGENCY USE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE WASHROOM.
SMOKE -- IN SMOKING AREAS ONLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:345F,174C
Melt/Freeze Pt:M.P/F.P Text:130F,54C
Vapor Density:HVR/AIR
Spec Gravity:1.25
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE SOLID, TYPICAL "PARA", MOTHBALL-TYPE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, IGNITION SOURCES.
Stability Condition to Avoid:AVOID CONTACT WITH ANY SOURCE OF IGNITION.
Hazardous Decomposition Products:THERMAL DECOMP YIELDS CO, CO*2 AND
HYDROCHLORIC ACID (HYDROGEN CHLORIDE).

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.